Best current price£18.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£18.99Visit shop Shower Part Grey 2 X E9 Aqata Exclusive Solutions Shower Door Rollers/Wheels/Runners With Thick And Thin Washers, 19.5Mm Diameter, 6.5Mm Thick, Shower Door Replacement Parts
Visit shop
eBay£18.99Visit shop 2 x E9 Shower Rollers/Runners/Pulleys/Wheels 19.5mm Suits Some Aqata Showers
Visit shop4 offers from £18.99 - £24.99
View price history by clicking the chart icon.
This guide is for users needing to replace worn or damaged shower door rollers on Aqata Exclusive Solutions and compatible shower models. The key benefit is restoring smooth, quiet operation to your shower door. A caveat is that precise measurement and compatibility checks are essential before purchase. This pack contains two essential replacement rollers, featuring specific wheel dimensions and washer types designed for optimal performance on the moving panel, whether at the top or bottom.
| Model Part Number | E9 |
|---|---|
| Brand | Shower Part |
No, these rollers are specifically designed for certain models, including Aqata Exclusive Solutions, and require a 14.5mm hole in the glass. Always check your existing roller's dimensions and specifications.
One roller has a thick washer for the center post side of the moving panel, and the other has a thin washer for the magnet side. This ensures correct door alignment and operation.
Measure the diameter of the wheel (e.g., 19.5mm), the thickness of the wheel (e.g., 6.5mm), the overall length of the roller assembly, and the diameter of the hole in the glass where it mounts (e.g., 14.5mm).
Yes, these rollers are designed to be suitable for both the top and bottom of shower doors.
Typically, a screwdriver and possibly pliers might be needed to remove the old rollers and install the new ones. Ensure you have a way to safely support the shower door during the process.
If your glass hole size differs from the required 14.5mm, these specific rollers will not fit. You will need to find replacement rollers compatible with your shower door's specifications.
Ensure the correct roller and washer combination was used for each side of the door. Check if the track is clean and free of obstructions. Verify the roller wheel is not rubbing against the track edge due to misalignment.
Confirm that the glass hole diameter required (14.5mm) matches your shower door. If it does not, this part is not compatible. Double-check your measurements.
Check that the rollers are securely fastened to the door. Ensure the shower door track is straight and not damaged, which could cause the rollers to derail.
Compatibility Check: Before installation, verify that your shower door system is designed for rollers with a 19.5mm wheel diameter, 6.5mm thickness, and requires a 14.5mm glass hole. Compare your existing roller dimensions and mounting method to these specifications. These are intended for Aqata Exclusive Solutions and similar models.
Installation:
Care:
