Safeguard Drybase Plaster Plugs - Orange
Best current price£34.99from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£34.99Visit shop Drybase Orange Plaster Membrane Positioning Plugs And Seals X 150 Pack
Visit shopAmazon£34.99Visit shop One Offer
1 offer from £34.99
View price history by clicking the chart icon.
AmazonDrybase Orange Plaster Membrane Positioning Plugs And Seals X 150 Pack
Free delivery in 1–3 days
£34.99
Visit shop
Product Information
Full details
This guide is for anyone using Drybase Plaster Plugs with Oldroyd Plaster Membrane to achieve a damp-proof seal. The key benefit is time savings during installation, thanks to their easy-to-use design and integrated seals. A point to note is that proper pre-drilling is essential for optimal performance.
All features
| Colour | Orange |
|---|---|
| Brand | Drybase |
Extended Product Information
FAQs
What size drill bit do I need?
You need an 8mm drill bit.
Can these plugs be used on wood?
No, these plugs are designed for use with brick, concrete, and stone.
How deep should I drill the holes?
Drill the holes to a depth of 60mm.
Do I need to use sealing rope with these plugs?
No, these plugs have integrated seals, eliminating the need for sealing rope.
Can I use these plugs with other brands of damp-proof membrane?
These plugs are designed specifically for use with Oldroyd plaster membrane.
What is the diameter of the plugs?
The diameter of the plugs is 8mm.
Are these plugs suitable for external applications?
Yes, these plugs can be used in both above-ground and below-ground applications, providing they are protected from direct weather exposure.
Troubleshooting
Plug doesn't stay in place.
Ensure the hole is the correct size (8mm) and depth (60mm). Check for any obstructions in the drilled hole.
Membrane isn't sealing properly.
Make sure the plug is fully inserted and flush with the wall. Check for any damage or tears in the membrane around the plug.
Difficulty hammering the plug in.
Use a rubber mallet or place a piece of wood over the plug to protect it from damage. Ensure the hole is clear of debris.
Pros and Cons
Pros
- Saves time compared to traditional methods.
- Ensures a damp-proof seal.
- Works on various substrates.
- Suitable for a wide range of applications.
- Easy to install.
Cons
- Requires pre-drilled holes for installation.
- Specific to use with Oldroyd Plaster Membrane.
- May require specific drill bit size for optimal performance.
Setup, Compatibility & Care
- Preparation: Ensure the surface (brick, concrete, or stone) is clean and free of debris.
- Drilling: Drill holes with an 8mm drill bit. The depth should match the plug length (60mm).
- Membrane Placement: Position the Oldroyd XV membrane against the wall, ensuring it's correctly aligned.
- Plug Insertion: Insert the Drybase Plaster Plugs into the pre-drilled holes, through the membrane.
- Hammering: Gently hammer the plugs into place until they are flush with the membrane and the wall. Ensure the seal is tight.
Compatibility: These plugs are specifically designed for use with Oldroyd XV plaster membrane. They are compatible with brick, concrete, and stone surfaces.
Care: No specific maintenance is required. Regularly inspect the plaster membrane for any signs of damage or water ingress.