Panel Beating Hammer Set - Clarke - 7 Pc

This set is primarily designed for reshaping common automotive sheet metals, including steel and aluminum alloys.

The choice of dolly depends on the contour of the metal around the dent. Use a dolly that best matches the curve of the panel to provide proper support during hammering.

Fibreglass handles are generally integrated and not designed for easy user replacement. If a handle is damaged, it's often more practical to replace the entire hammer.

No, this set is specifically designed for panel beating and metal shaping. Using them for general construction or demolition could damage the tools and is unsafe.

Keep the surfaces of the dollies clean and free from debris. Periodically check for any significant dents or burrs on their surfaces, which could transfer to the metal you are working on. Lightly oil them for storage.

Drop-forging creates a stronger, denser, and more durable metal structure compared to casting or other methods. This results in heads that are less likely to chip, crack, or deform under impact.

Inspect the handle and head connection. If the wedge is loose, attempt to re-seat it. If the handle is damaged, the hammer should be replaced.

Ensure you are using the correct hammer and dolly combination for the specific task. Check that the metal surface is clean and free from contaminants. Sharpen or smooth the edges of the dolly if they have become deformed.

This usually indicates excessive force or striking inappropriate materials. Ensure you are using the set only for its intended purpose on sheet metal. Reduce the force of your blows and focus on technique.

Clean the affected area thoroughly with a fine-grade steel wool or wire brush. Apply a rust inhibitor or light machine oil to prevent recurrence. Ensure tools are stored in a dry environment.