Bolt Cutter - S&R 200 mm

The S&R 200 mm Bolt Cutter is designed to cut bolts and wires up to a maximum diameter of 3.6 mm.

You can cut structural steel mats, wire meshes, wires of all kinds, and bolts up to Ø 3.6 mm.

No, this bolt cutter is not designed for cutting hardened steel rods or materials significantly harder than standard bolts and wires up to 3.6 mm. Doing so can damage the cutting edges.

Keep the cutting edges clean and dry. Apply light machine oil to the pivot point periodically and store the tool in a dry place to prevent rust and ensure smooth operation.

The total length is 200 mm, and the jaw length is 14 mm. The weight is 350 grams.

Yes, the bolt cutters feature double-jacketed, ergonomically shaped handles designed to protect your hands and provide comfort during demanding use.

Check the pivot point for debris or rust. Clean and apply a light machine oil. Ensure the tool is not being used on materials thicker than 3.6 mm, which can bend the jaws.

Inspect the jaws for nicks or excessive wear. If minor, cleaning and honing may help. For significant damage, replacement of the tool may be necessary. Avoid cutting hardened materials.

Ensure you are using the correct grip. The double-jacketed handles are designed for comfort, but proper technique is still important. Check handles for damage; if the jacketing is compromised, consider replacement.