3 Tonne Heavy-Duty Beam Clamp - Loops

The maximum load capacity of this beam clamp is 3000kg (3 Tonne).

The clamp is adjustable for steel beams with widths ranging from 80mm to 320mm.

This clamp is designed for semi-permanent attachment. While secure, it is intended for applications where removal and reattachment may occur, not for permanent structural integration.

It is suitable for use with chain blocks, hoists, and other general lifting tackles that can be securely attached to the integral pivot/lifting point.

It is recommended to inspect the beam clamp thoroughly before each use for any signs of wear or damage.

Key dimensions include an overall height (A) of 354mm, a length including adjustment (B) of 235-490mm, and a jaw depth (C) of 103mm. Refer to the product catalogue for a full diagram with all dimensions (D-H).

While robust, prolonged exposure to outdoor elements can lead to rust. It is best used in sheltered workshop environments or protected from moisture and extreme weather when used outdoors.

Ensure the beam width is within the clamp's adjustable range (80-320mm). Tighten the adjustment mechanism firmly and evenly. Inspect the beam surface for obstructions.

Clean the adjustment mechanism to remove any dirt or debris. Lubricate the threads if necessary. Ensure the clamp is not under excessive load during adjustment.

Cease use immediately. Inspect for cracks, deformation, or excessive wear. If significant damage is present, the clamp should be retired from service and replaced.

Gently remove surface rust with a wire brush. Clean the affected area and apply a light coat of appropriate rust-inhibiting lubricant. Store in a dry environment to prevent further rusting.