Rustins Pre Stain Wood Conditioner 500Ml - Brown

It is used to prepare bare wood surfaces before staining or varnishing, ensuring a more uniform and professional finish by preventing blotching.

Yes, it is suitable for use on most types of wood, including both softwoods and hardwoods.

Apply it evenly using a brush, cloth, or applicator, ensuring complete coverage of the wood surface.

Allow the conditioner to dry completely before applying stain or varnish. Drying times can vary depending on environmental conditions, but usually at least 2 hours.

Yes, it is compatible with both solvent and water-based stains and varnishes.

One litre will cover approximately 12 sq m per coat, depending on the absorbency of the surface.

Clean tools immediately after use with water or the appropriate solvent, as recommended by the manufacturer.

Store the product in a cool, dry place and keep the container tightly sealed.

Ensure the wood surface was properly prepared. Re-sand the area and reapply the wood conditioner. Ensure even coverage.

Check the drying time; ensure the conditioner dried completely before applying the stain. Apply a second coat of conditioner to highly absorbent areas.

Work in a well-ventilated area to reduce rapid drying. Avoid applying in direct sunlight.