Best current price£54.28from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£54.28Visit shop Finder White 18 Motion Switch (Complete) - 18.31.8.230.0000
Visit shop10 offers from £54.28 - £136.06
View price history by clicking the chart icon.
The Finder 18.A1.8.230.0000 PIR movement detector is designed for outdoor security lighting and building automation, offering reliable motion detection for energy efficiency and enhanced safety. Its key benefit lies in its passive infrared technology and adjustable sensitivity, ensuring accurate detection while minimizing false triggers. A potential caveat is its specific mounting height recommendation for optimal performance. This device features creep-under protection and staircase monitoring, operating effectively in a wide temperature range.
| Model Part Number | 18.A1.8.230.0000 |
|---|---|
| Brand | Finder |
The optimal mounting height for the Finder 18.A1.8.230.0000 is 2 meters to ensure effective and accurate detection.
Yes, with its IP55 protection rating and wide operating temperature range (-30 to +50 °C), it is suitable for outdoor applications.
The detector has a maximum switching power of 1000W and is suitable for C-load applications.
The detector features adjustable sensitivity and luminosity response values. These are typically adjusted via potentiometers or switches located on the device itself; refer to the specific installation manual for precise locations and adjustment methods.
Creep-under protection is a feature that allows the detector to sense movement at very low levels, even underneath the main detection zone, enhancing security by detecting someone attempting to crawl under a sensor's primary field of view.
The detector has a horizontal detection angle of 110° and a horizontal pivoting range of 180°.
It operates on AC voltage ranging from 110 to 230V, with a frequency of 50 to 60 Hz.
Verify power supply (110-230V AC). Check if the sensitivity and luminosity settings are appropriately adjusted. Ensure the detected motion is within the 10-meter range and 110° angle. Test the connected light fixture independently.
Adjust the sensitivity setting to a lower level to reduce false triggers from environmental factors. Check the staircase monitoring and creep-under protection settings. Ensure the maximum duty cycle (20 minutes) or minimum switch-on time (10 seconds) is not causing unexpected behavior.
Confirm the mounting height is close to the recommended 2 meters. Adjust the sensitivity to a higher level. Ensure there are no obstructions between the sensor and the motion source. Check the creep-under protection function, as it may affect close-range detection if not configured properly.
Ensure the ambient temperature is within the operational range of -30 to +50 °C. If operating at the extremes, allow the device some time to acclimate after installation or power cycling.
Setup: The detector is designed for surface mounting. Ensure it is installed at the optimal height of 2 meters for best performance. Connect the device to an AC power source operating between 110 - 230V, respecting the 50-60 Hz frequency. Adjust the sensitivity and luminosity response settings according to the installation environment and desired detection behavior. The 180° horizontal pivoting range allows for fine-tuning the detection zone after initial mounting.
Compatibility: This model operates on AC voltage and is compatible with systems designed for 110-230V. It is suitable for C-load applications and can handle a maximum switching power of 1000W. Ensure your electrical system can accommodate the 100A maximum starting current.
Care: To maintain optimal performance, regularly clean the detector's lens with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they can damage the material. Check for any obstructions or debris around the sensor area periodically, especially in dusty or outdoor environments.
