Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop 3x Bartoline Ready Mix Wood Filler Brown Flexible Adhesion Door Repair 330g
Visit shop
B&Q£13.99Visit shop B&Q - 3X Ready Mix Wood Filler Brown Flexible Adhesion Door Repair 330G
Visit shop3 offers from £11.19 - £14.99
View price history by clicking the chart icon.
The Bartoline Ready Mix Wood Filler in Brown is designed for DIY enthusiasts and tradespeople needing to repair imperfections in wood. Its key benefit is providing a flexible, paintable, and stainable finish for various wooden surfaces like window frames and doors. A potential caveat is that for outdoor use, it requires sealing with oil-based paint or varnish and should not be used in constantly wet environments.
| Colour | Brown |
|---|---|
| Model Part Number | RM0220 |
| Brand | Bartoline |
Yes, provided the painted surface is sound and clean. For best adhesion, lightly abrade the painted surface before applying the filler.
Drying time varies depending on application thickness and environmental conditions (temperature, humidity). Allow each 6mm layer to set before applying the next, and ensure it is completely dry before sanding or finishing.
It's best to wait until the filler is completely dry and cured. Applying paint too soon may affect adhesion and finish. Check the product for specific recoating times.
This wood filler is intended for cosmetic repairs and filling minor imperfections. It is not designed for structural repairs that require significant load-bearing strength.
Store the tube in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use to prevent the filler from drying out.
Yes, but it must be sealed with an oil-based paint or varnish for protection against weather. Do not use in areas that are constantly wet.
Ensure the wood surface is thoroughly cleaned, dry, and free from dust, grease, or paint. Remove any loose or rotten wood before application. Overpaint metal fixings with an oil-based primer.
Avoid applying filler thicker than 6mm in a single layer. For deeper repairs, apply in multiple thin layers, allowing each to set. Ensure the wood itself is stable and not excessively warped.
This can occur if applied too thickly or in humid conditions. Ensure adequate ventilation and allow sufficient time for drying. Do not apply more than the recommended 6mm thickness per layer.
Allow the filler to cure completely before attempting to sand. If it's still too soft, it may not have fully dried. Ensure you are using appropriate grit sandpaper.
Preparation:
Ensure the surface to be filled is clean, dry, and free from dust and debris. Remove any loose or rotten wood to create a solid base for the filler. If filling over nails or metal fittings, apply an oil-based primer first.
Application:
For best results, work the tube between your fingers before opening. Cut the nozzle to the desired angle. Apply the filler firmly into the repair using a putty knife or appropriate tool. For deep repairs, apply in layers no thicker than 6mm, allowing each layer to set before applying the next. Overfill slightly proud of the surrounding surface.
Finishing:
Once completely set, sand the filler smooth to create a perfect finish that blends with the surrounding wood. For exterior use, seal the filled area with an oil-based paint or varnish to protect it from the elements. Do not use in areas that are permanently exposed to water.
Storage:
Store in a cool, dry place. Ensure the cap is securely replaced after use.
