Unglazed Flush Internal Door - White - B&Q

Yes, this unglazed flush door is specifically designed as a 'blank canvas' to be painted or finished in a color of your choice to match your interior decor.

No, this door is supplied without hardware such as hinges, handles, or latches. These items need to be purchased separately to allow for full customization and proper installation.

The door measures (H)2032mm (W)813mm (T)35mm.

Yes, as an internal door, it is generally suitable for bathrooms. However, ensure good ventilation in the bathroom to protect the door from excessive moisture, and ensure all edges are properly sealed with paint or a suitable finish.

After the door has been painted or finished, simply clean it with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the surface.

While designed as a blank canvas, priming is generally recommended for optimal paint adhesion, even coverage, and a more durable finish. Always refer to your chosen paint product's instructions for specific priming requirements.

No, this product is specifically an internal door and is not designed or treated for exterior use. Using it outdoors would void any potential warranty and lead to premature wear and damage from weather exposure.

Check if the door is rubbing against the frame. This may require re-adjusting hinges, re-trimming edges, or ensuring the frame is square. Swelling due to moisture can also cause sticking; ensure the door is properly sealed.

Ensure the door surface was properly prepared (sanded, clean, dry, and primed if necessary) before painting. Apply paint in thin, even coats and allow sufficient drying time between coats. Use high-quality interior paint suitable for doors.

This often indicates too much clearance between the door and the frame. Check hinge screws for tightness. Applying thin weatherstripping or draught excluder around the frame can help create a snugger fit and reduce rattling.

Inspect for gaps between the door and the frame or under the door. Consider installing a door sweep at the bottom and draught excluders around the frame edges for better sealing.