Best current price£24.60from eBay
Shopping.co.uk recommended and popular offers
eBay£24.60Visit shop Hempel Multicoat Semi Gloss - Mid Grey - 750ml (Boat / Marine / Yacht)
Visit shop
Amazon£27.13Visit shop Hempel Grey Multicoat Primer & Top Coat 750Ml: Mid
Visit shop3 offers from £24.60 - £32.66
View price history by clicking the chart icon.
The Hempel Multicoat in Cream (750ml) is designed for users seeking a durable and versatile coating solution for various surfaces. Its key benefit is excellent resistance to harsh environmental factors like sunlight, saltwater, and oil spills, ensuring long-lasting protection. A potential consideration is its good, not exceptional, brushability, requiring attention during application. This coating offers robust protection and can be applied using multiple methods, making it a practical choice for demanding applications.
| Colour | Cream |
|---|---|
| Model Part Number | H51120-11480-750ML |
| Brand | Hempel |
| Container Volume | 750ml |
Hempel Multicoat is a versatile coating suitable for various surfaces including wood, metal, and previously painted surfaces, provided they are properly prepared. Always consult the product data sheet for specific substrate recommendations.
Clean tools and equipment immediately after use with a suitable solvent or cleaner. Once the coating is cured, cleaning can be done with mild detergent and water.
It is recommended to apply Hempel Multicoat in temperatures between 5°C (41°F) and 30°C (86°F). Avoid application in direct sunlight or excessively high humidity.
The coating offers resistance to mineral oil spills. For specific chemical resistance, consult the detailed technical data sheet.
Yes, Hempel Multicoat can be applied via spray, brush, roller, or pad. Ensure you follow the recommended thinning and application guidelines for spray application.
Unopened containers typically have a shelf life of two years when stored in a cool, dry place away from direct sunlight. Refer to the packaging for specific batch information.
Ensure proper surface preparation and consistent application technique. Avoid overworking the coating in one area. Allow adequate drying time between coats if necessary.
Verify that the surface was clean, dry, and properly prepared. Ensure the correct primer was used if required. Check for incompatible existing finishes.
Check environmental conditions (temperature, humidity). If necessary, slightly thin the product according to manufacturer guidelines for the specific application method being used. Ensure the container has been stirred thoroughly.
Preparation: Ensure the surface to be coated is clean, dry, and free from grease, oil, and other contaminants. Light sanding may be required for optimal adhesion on smooth surfaces. Refer to specific product data sheets for detailed surface preparation guidelines based on the substrate material.
Application: This coating is compatible with brush, roller, pad, or spray application. Use appropriate thinning if required by the application method and conditions, following manufacturer recommendations. Apply in well-ventilated areas. Avoid application in direct sunlight or in temperatures below 5°C (41°F) or above 30°C (86°F).
Care: Clean tools and equipment immediately after use with a suitable solvent or cleaner. Once cured, the surface can be cleaned with mild detergent and water. Avoid abrasive cleaners or solvents that may damage the coating.
Compatibility: Hempel Multicoat is designed as a versatile coating but should not be applied over incompatible existing finishes. Always test on an inconspicuous area if unsure about compatibility with previous coatings.
