Setup, Compatibility & Care Instructions
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, or flaking paint. While the paint is self-priming, any loose or unstable finishes should be removed. For previously painted surfaces, a light sanding may improve adhesion. Test on a small, inconspicuous area first, especially on previously varnished or glossy surfaces.
Application:
Stir the paint thoroughly before use. Apply using a good quality brush or roller. Two thin coats are generally recommended for best results, allowing adequate drying time between coats (check tin for specifics, but usually 1-2 hours). For furniture and woodwork, apply thin, even coats. For walls and ceilings, work in a consistent pattern.
Compatibility:
Suitable for interior walls, ceilings, wooden furniture, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, and interior uPVC. Avoid use in areas with constant high moisture, such as inside shower enclosures or directly behind bath surrounds.
Care:
Allow the paint to cure fully for optimal durability (typically 2-3 weeks). Once cured, the finish is scrubbable to ISO11998 Class 1 Wet Scrub rating. Clean spills or marks gently with a damp cloth and mild soap if necessary. Avoid abrasive cleaners or tools, which can damage the ultra-matte finish.