Finder Multi-Function Timer Relay - 85 Series - 24V AC/DC

This Finder 85 Series timer relay requires a 24V AC or 24V DC power supply.

The relay offers 4 programmable functions, providing flexibility for various timing applications.

The dual changeover contacts are rated for a maximum of 10A at 250VAC.

Yes, this is a plug-in timer relay and requires a compatible Finder 85 Series socket base for installation and connection.

Yes, depending on the programmed function, it can be used for basic timed on/off switching tasks. Some functions are designed for specific delays or cyclings.

Dual changeover means the relay has two sets of contacts (form C or SPDT). Each set has a common terminal, a normally open (NO) terminal, and a normally closed (NC) terminal, allowing control of two independent circuits.

While functional, it is primarily designed and optimized for industrial control applications. For simpler domestic timing needs, other specialized products might be more appropriate.

Verify that the 24V AC/DC power supply is correctly connected to the socket base terminals and is providing the correct voltage. Check all wiring connections for security.

Confirm that the correct function and time settings have been selected. Ensure the input signal (if applicable for certain functions) is present. Check if the load connected to the contacts exceeds the 10A/250VAC rating.

Ensure the power supply voltage is stable and within the specified range. Re-check the programmed time settings for clarity. Extreme ambient temperatures can sometimes affect precision.

This may indicate an unstable power supply or a voltage mismatch. Confirm the power source is stable 24V AC/DC. If using AC, ensure it's a clean sine wave.