Blackmagic Design Videohub Mini 4x2 12G

The Videohub Mini 4x2 12G supports all SDI standards up to Ultra HD (2160p60).

Yes, the router supports any combination of SD, HD, and Ultra HD signals on the same router at the same time.

It provides a quick and accessible 12G-SDI input for patching external gear, like a camera or laptop, without disrupting the main routing setup.

Basic routing functions can be controlled directly from the front-panel buttons. Software may be required for advanced configurations or firmware updates.

SDI re-clocking cleans up and regenerates the SDI signal, ensuring optimal signal quality and preventing data errors, especially over longer cable runs.

Yes, it features a USB-C webcam output that allows it to be recognized by computers for recording, streaming, or video analysis software.

The device uses an external power supply. Please refer to the product specifications or included manual for the exact power adapter details.

Verify all SDI cables are securely connected to the correct inputs and outputs. Ensure the source devices are powered on and outputting a signal. Check that the selected input is active on the router. Confirm output destinations are set to the correct video standard.

Check the quality and length of your SDI cables; use certified SDI cables. Ensure SDI re-clocking is functioning correctly by testing with different cable lengths. Try a different input or output port.

Ensure the USB-C cable is connected securely to both the router and the computer. Try a different USB-C port on the computer or a different USB-C cable. Make sure the router is powered on and the correct input is selected for the USB output.

Try power cycling the unit by unplugging the power adapter, waiting 10 seconds, and plugging it back in. Ensure the firmware is up-to-date if applicable (check Blackmagic Design support for firmware updates).