TIMco Through Bolt - M12 x 140mm - Silver

Torque-controlled anchoring ensures that the bolt is tightened to a specific, calibrated level. This prevents over-tightening, which can damage the concrete or the bolt, and under-tightening, which can lead to a weak connection. It provides a consistent and reliable fastening integrity.

No, the TIMco Through Bolt is designed for clean, dry environments. Its zinc plating and passivation offer corrosion resistance suitable for these conditions, but it is not intended for prolonged exposure to moisture or high humidity.

The required fixture hole size for the TIMco Through Bolt M12 x 140mm is Ø14mm.

If a torque spanner is unavailable, you can achieve adequate tightening by turning the bolt with 3 to 4 full finger turns after it becomes snug. This provides installation flexibility on site.

The bolt is manufactured from cold-formed carbon steel.

The bag quantity for this product is 10 units.

Yes, the product includes a Form A, M12 x 24mm washer.

Ensure the hole diameter is correct (Ø14mm) and thoroughly cleaned. Verify that the bolt is fully seated and that the expansion clip is functioning correctly. Re-attempt tightening, ensuring consistent torque application.

The chamfered head design should prevent this during normal installation. If damage is present, do not use the bolt. Inspect the installation tool for burrs and ensure the hole is properly aligned.

This bolt is intended for dry environments. If corrosion is observed, it indicates the bolt is exposed to moisture or humidity beyond its intended use. Consider replacing with a more corrosion-resistant anchor if the environment cannot be improved.