Draper 89mm Metal Cut Blade - Draper - 25914

The Draper 89mm Metal Cut Blade is designed for cutting various metals. The included blades (HSS, TCT, and Diamond) allow cutting of different metal types. Refer to the saw's manual for specific material recommendations.

Follow the instructions in your Draper Storm Force Mini Plunge Saw manual. Always unplug the saw before changing blades and wear gloves. Use the appropriate tools to safely remove and install the new blade.

The laser guide projects a line onto the material, helping you make straight and accurate cuts. Align the blade with the laser line for precise results.

Use the cutting depth adjustment mechanism on your Draper Storm Force Mini Plunge Saw. Set the depth to the desired measurement, ensuring it does not exceed the maximum cutting depth of 28.5mm.

Always wear safety glasses and gloves when operating the saw. Ensure the material is securely clamped. Do not force the cut; let the blade do the work. Unplug the saw before changing blades or performing any maintenance.

Replacement blades can be found at most hardware stores or online retailers that sell Draper products.

This blade is specifically designed for use with the Draper Storm Force Mini Plunge Saw. Using it with other saw brands is not recommended.

Check and adjust the parallel fence guide. Ensure the material is securely clamped. Verify the blade is properly installed.

Check the laser's power source. Replace the batteries if needed. Clean the laser lens.

Replace the blade with a new one. Choose the correct blade type for the material being cut.

Check the blade for damage. Ensure the blade is securely fastened. Reduce the cutting speed if necessary.