Bosch Universalimpact 730 - 0.603.313.470

Simply turn the spindle of the quick-action chuck to open it, insert the drill bit, and then tighten the chuck by turning the spindle again until the bit is securely held.

Yes, you can use the UniversalImpact 730 on metal. Adjust the speed to a lower setting and use a cutting oil to prevent overheating and ensure efficient drilling.

The impact function is designed for drilling into masonry, concrete, and similar hard materials. It provides a hammering action to assist with drilling.

Use the speed preselection wheel located on the throttle switch. Adjust the wheel to the desired speed before starting the drill.

Yes, the Bosch UniversalImpact 730 comes with a carrying case.

The product comes with a 1-year warranty.

Use a damp cloth to clean the drill. Do not submerge the drill in water or use harsh chemicals.

Always wear safety glasses when drilling. Make sure the drill is unplugged before changing bits or performing maintenance. Use appropriate speed for the material. Keep the work area clean and well-lit.

Check the power cord and outlet. Ensure the drill is properly plugged in and that the outlet is functioning. Check the switch.

Tighten the drill chuck securely. Make sure the drill bit is the correct size and type for the material.

Adjust the speed setting to match the material. Check the drill bit for dullness or damage and replace if necessary. Apply more pressure, but avoid forcing the drill.

Allow the drill to cool down. Reduce the drilling speed and avoid continuous use for extended periods.