Bertazzoni Professional Series Electric Range Cooker - Silver - A

The induction hob works with cookware that has a magnetic base. This includes most cast iron, stainless steel, and enameled steel pots and pans. You can test suitability by seeing if a magnet sticks to the base of the cookware.

The boost function provides maximum power to a selected zone for a limited time, allowing for rapid heating. Consult your user manual for the specific sequence to activate this feature on your model.

Yes, the oven door glass is removable, which facilitates easier and more thorough cleaning. Refer to the 'Care' section of this guide or your user manual for instructions on safe removal and reinstallation.

The cooker has an energy efficiency rating of A, indicating it is designed for efficient energy consumption relative to its performance.

No, this Bertazzoni PRO125I2EXT2 model does not feature a self-cleaning function. Cleaning is performed manually using the easy-clean enamel coating and removable door glass.

The hob features five cooking zones, offering ample space and flexibility for various cooking tasks.

Each of the two ovens has a net capacity of 51 litres.

Check that the main power switch is on and that the circuit breaker has not tripped. Ensure the oven doors are properly closed. Verify that the power cable is securely connected (if applicable after professional installation).

Ensure the correct zone is selected and the desired power level is set. Check if pan detection is active and that the cookware is suitable for induction (magnetic base). Remove any debris from the hob surface.

Verify the selected function and temperature setting. Ensure the oven door is fully closed and the triple-glass panels are intact. Check if the boost function is inadvertently engaged on the hob, drawing power.

Refer to the user manual for a specific explanation of the error code. Common solutions involve turning the cooker off at the mains for a few minutes and then switching it back on.

The bulb may need replacing. Turn off power to the cooker at the mains before attempting to replace the bulb, following the instructions in the user manual.