Barilo Bio Ethanol Stove - Matte Black

The Barilo Bio Ethanol Stove uses liquid bio ethanol fuel only. Do not use gel fuel, gasoline, or any other flammable liquids.

The 1.5-liter capacity stainless steel burner provides approximately 3 to 5 hours of burn time, depending on the flame intensity setting.

No, the Barilo Bio Ethanol Stove does not require a chimney, flue, or any external venting, making installation simple and flexible.

No, the Barilo Bio Ethanol Stove provides up to 3kW of heat output and is intended for supplemental heating and ambiance, not as a primary heat source for your home.

Ensure the stove is completely cool. For the matte black exterior, wipe with a soft, damp cloth. The stainless steel burner can be cleaned with a damp cloth and mild soap solution after ensuring it's empty and cool, then thoroughly rinsed and dried.

While generally safe when properly set up, it's recommended not to leave any open flame unattended. Always supervise children and pets when the stove is in use.

The stove can provide a heat output of up to 3kW, which can be adjusted using the supplied control tool.

Place it on a stable, level, non-combustible surface, ensuring at least 1 meter of clearance from any flammable materials (curtains, furniture, etc.) and in a well-ventilated room.

Check if the burner reservoir has enough bio ethanol fuel. Ensure the burner opening is sufficiently wide. If the burner is new, allow the fuel to soak for a few minutes before lighting.

Use the supplied control tool to partially close the burner opening, which will reduce the flame size and intensity. Ensure you are using proper bio ethanol fuel.

Verify the burner opening is not fully open, as a larger flame consumes fuel faster. Check for strong drafts in the room that might be accelerating fuel evaporation. Ensure the fuel reservoir is filled to the recommended level.

While bio ethanol burns cleanly, a slight odor might be present immediately after lighting or if the fuel quality is low. Ensure you are using high-quality bio ethanol fuel. If smoke is present, extinguish immediately and ensure adequate ventilation in the room. This can also happen if the burner is overfilled.

Confirm the burner opening is adjusted to its maximum safe setting to allow for a larger flame and greater heat output. Remember, this stove provides supplemental heat, not primary heating for large areas. Ensure the room size is appropriate for a 3kW heat output.