Best current price£9.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.99Visit shop B&Q - 10 X 6 mm Duplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Visit shop1 offer from £9.99
View price history by clicking the chart icon.
The SolaDirect Duplex Rope Clip Clamp Fixing is designed for securing the loose end of a wire rope loop back onto the main rope, creating a reliable connection point. It's ideal for users who need to attach their wire ropes to other cables or equipment like thimbles and turnbuckles, though it can also be used with jute and polypropylene ropes. A key benefit is its role in creating secure, permanent or semi-permanent loops for rigging and general use. One caveat is ensuring the correct clamp size is matched to the rope diameter to guarantee optimal holding power and safety.
| Brand | SolaDirect |
|---|
Its main function is to secure the end of a wire rope loop back onto the rope itself, creating a strong, reliable eyelet for connections.
These clamps are primarily designed for wire ropes but are also applicable for jute and polypropylene ropes. They are not intended for all types of synthetic or natural fiber ropes.
The clamp size corresponds directly to the diameter of the rope it is intended to secure. Always check the product specifications or packaging for the recommended rope diameter for each clamp size.
For most standard applications, two or three clamps are recommended per loop, spaced appropriately along the dead end of the rope, to ensure adequate holding strength.
A duplex clip typically refers to a clamp designed with two U-bolts and a saddle, creating a more robust connection than some single U-bolt clamp designs. The term 'duplex' here emphasizes the two-part clamping action.
No, typically only a wrench or socket set is needed to tighten the nuts on the U-bolts.
The U-bolt should always be placed on the 'dead' or loose end of the rope (the tail), while the saddle should be on the 'live' or load-bearing section of the rope forming the loop.
Ensure the correct size clamp for the rope diameter was used. Verify that the saddle is on the load-bearing side and the U-bolts are on the tail. Re-tighten nuts firmly and evenly. Check for rope damage or excessive wear.
Check that the threads on the U-bolt and nuts are clean and free from debris or damage. Lubricate threads lightly if necessary, but ensure lubricant does not compromise grip. Ensure the clamp is correctly seated on the rope.
Clean the clamp with a wire brush. If corrosion is severe, the clamp may need replacement, especially if structural integrity is compromised. Apply a suitable anti-corrosion treatment for future use if the environment is harsh.
This often indicates the clamp is too small for the rope or overtightened. Ensure the correct clamp size is used and tighten nuts progressively and evenly, rather than applying excessive force to one side.
Setup:
Compatibility:
Care:
