Gyproc FibaTape Xtreme - Extra Wide - 100mm x 75m - Orange

Use a jointing compound specifically designed for plasterboard. Follow the compound manufacturer's instructions for mixing and application.

While the tape is flexible, it works best on flat or gently curved surfaces. For tight curves, consider using a paper tape.

Carefully cut away the tape using a utility knife. You may need to repair the underlying plasterboard surface before reapplying the tape.

When stored properly, the tape should remain effective for several years. Always check the adhesive before use.

Yes, after applying jointing compound and sanding smooth, the tape can be painted over. Ensure the compound is completely dry before painting.

The tape performs best within a temperature range of 5-35°C.

Ensure the surface is clean and dry. Press the tape firmly onto the surface and use a suitable jointing compound.

Carefully smooth out the tape during application to remove air pockets. Re-apply if necessary, ensuring a flat and even surface before applying jointing compound.

Use a sharp utility knife to cut the tape and avoid pulling it excessively. Ensure you're not applying tape over damaged plasterboard.