Axminster Workshop Junior Hacksaw - JHF/10
Best current price£5.98from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£5.98Visit shop - Axminster Workshop Junior Hacksaw
Visit shopB&Q£5.98Visit shop One Offer
1 offer from £5.98
View price history by clicking the chart icon.
Product Information
Full details
The Axminster Workshop Junior Hacksaw is an essential tool for hobbyists, craftspeople, and DIY enthusiasts who require a compact, reliable solution for light-duty metal and plastic cutting tasks. Its primary benefit is the specialized blade holder design that eliminates sharp, protruding blade ends, significantly improving user safety during operation. However, potential users should note that as a junior-sized tool, it is designed for smaller, precise cuts rather than heavy-duty industrial demolition work.
All features
| Model Part Number | JHF/10 |
|---|---|
| Brand | Axminster Workshop |
Extended Product Information
FAQs
Can this saw cut through solid steel bars?
While it can cut through small-diameter steel rod, it is optimized for thinner-walled metal and plastic; heavy-duty bars will require significant time and effort.
What type of replacement blades should I buy?
This tool accepts any standard-length junior hacksaw blades available at most hardware stores.
Does the chrome finish chip easily?
The chrome finish is durable and designed to resist regular workshop wear, though it should be protected from sharp impacts against hardened steel tools.
Is this saw suitable for wood?
While it can cut thin dowels or soft wood, the fine tooth pitch is specifically designed for metal and hard plastics. A coping saw or wood saw is recommended for extensive woodwork.
How do I ensure the cut stays straight?
Use your thumb knuckle as a guide for the first few strokes to score a groove, then maintain a slow, steady rhythm for the duration of the cut.
Troubleshooting
Blade flexes or wanders during the cut
Increase the tension by tightening the blade holder mechanism until the blade is rigid.
Blade teeth binding in the material
Ensure the teeth are pointing away from the handle and use lighter pressure on the cutting stroke.
Difficulty in getting the blade into the holders
Loosen the tensioner significantly before attempting to insert the pins of the blade into the holders.
Pros and Cons
Pros
- Safety-focused design prevents protruding blade ends
- Durable chrome plating protects against rust and wear
- Compact form factor is ideal for intricate work
- Lightweight construction reduces hand fatigue
- Easy to store in standard toolboxes
Cons
- Not suitable for thick or large-diameter materials
- Limited cutting depth due to the junior frame size
- Requires manual blade tensioning adjustments
- May struggle with extremely hard alloys
Setup, Compatibility & Care
To install a blade, release the tension mechanism, hook the new blade into the holders at both ends, and tighten until the blade rings with a high pitch when plucked. Ensure the teeth of the blade are pointing away from the handle for standard push-stroke cutting. Compatibility is limited to standard-length junior hacksaw blades. To maintain the tool, wipe the chrome frame with an oily rag after use to prevent fingerprints and potential oxidation. Store the saw in a dry toolbox environment. If the chrome finish becomes dusty, a simple wipe with a clean, dry cloth is sufficient; avoid using harsh chemical solvents that could potentially degrade the grip or tensioning components.