Rapide Bond & Fill Expanding Foam Filler 500ml - Multicolor

The foam expands up to 33 liters, allowing it to fill significant gaps and cavities.

Yes, once the foam is fully dried, you can paint over it to match your existing surfaces.

It is suitable for use on brick, concrete, plaster, and stone.

Drying time varies depending on environmental conditions but typically takes a few hours to a day to fully cure.

While it offers some moisture resistance, it is not fully waterproof. It is best used in areas where it is not constantly exposed to water.

Once dry, excess foam can be cut away with a utility knife or sanded down. Uncured foam can be cleaned with a solvent designed for polyurethane foam.

Yes, it provides some sound insulation, making it suitable for reducing noise transfer in walls and cavities.

Ensure the can is shaken well before use. Check the expiration date. The temperature might be too cold; use in a warmer environment.

Apply the foam in small amounts. Allow for expansion and use a utility knife to trim excess foam after it dries.

Clean the nozzle immediately after use. If the nozzle is clogged, replace it or use a pin to clear the opening.