Multicomp Pro Inlet, IEC C8, Class 2, Fig 8, Solder Tag - JR-201S
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Multicomp Pro JR-201S inlet is designed for electronics manufacturers and engineers needing a reliable PCB mount power connector. Its key benefit is secure solder termination for Class 2 applications, offering a stable 2.5A current and 250VAC voltage rating. A potential caveat for users is its specific through-hole mounting, requiring careful PCB design and soldering.
All features
| Model Part Number | JR-201S |
|---|---|
| Brand | MULTICOMP PRO |
Extended Product Information
FAQs
What is Class 2 insulation?
Class 2 insulation refers to electrical appliances that are protected by double or reinforced insulation. This means they do not rely solely on basic insulation but have additional protective measures, often eliminating the need for an earth ground connection.
Can I use this with a higher current power cord?
While a higher-rated power cord can physically connect, the inlet itself is rated for a maximum of 2.5A. Exceeding this rating can lead to overheating, component failure, and safety hazards.
What does 'Fig 8' refer to?
'Fig 8' is a common informal name for the IEC C8 connector shape, referring to the shape of the mating connector on the power cord which resembles the number 8.
Is this connector suitable for outdoor use?
The JR-201S has an operating temperature range of -25 to 85°C but is not rated for outdoor environmental conditions like water or dust ingress. It is intended for indoor electronic equipment.
What is the warranty period for this component?
Please refer to the retailer or distributor for specific warranty information, as it can vary.
How do I clean the inlet if it gets dusty?
Once installed, it is best to avoid direct cleaning. If dust accumulation is a concern, use compressed air to gently blow dust away from the connector opening, ensuring no debris is pushed further in.
Troubleshooting
No power to the device after installation
Check solder joints for continuity. Ensure the IEC C8 power cord is fully inserted into the inlet. Verify the device's internal power circuitry.
Intermittent power connection
Inspect solder joints for cracks or cold solder points. Ensure the power cord is not damaged and is securely seated. Check for any strain on the inlet.
Overheating at the connection point
Verify that the connected device's current draw does not exceed the inlet's 2.5A rating. Check solder joint quality; poor connections can increase resistance and heat. Ensure adequate airflow around the device.
Pros and Cons
Pros
- Secure and permanent solder connection for stable power input.
- Compact size suitable for space-constrained PCB designs.
- Standard IEC C8 compatibility ensures broad cord availability.
- Robust Nylon 66 construction offers good durability.
- Class 2 rating simplifies integration in certain product types.
Cons
- Requires soldering skills and appropriate equipment for installation.
- Not suitable for applications requiring field-serviceable connectors.
- Limited to 2.5A current, not appropriate for high-power devices.
- Specific through-hole mounting may limit placement options on complex PCBs.
Setup, Compatibility & Care
Setup:
- Identify the correct mounting holes on your PCB, ensuring they match the through-hole pin layout of the JR-201S.
- Insert the inlet's solder tags through the designated holes on the PCB.
- Carefully solder the tags to the PCB traces using appropriate soldering equipment and techniques. Ensure a clean, solid joint for both connections.
- Verify the integrity of the solder joints and check for any potential shorts.
Compatibility:
- Power Cords: Compatible with standard IEC C8 (Fig. 8) power cords.
- PCB Thickness: Designed for standard PCB thicknesses where through-hole components are accommodated.
- Voltage/Current: Suitable for devices operating within a 2.5A and 250VAC range.
Care:
- This component is designed for permanent installation and does not require user maintenance after assembly.
- Avoid exposing the installed component to excessive moisture or extreme temperatures beyond its operating range (-25°C to 85°C).