SGS 24L Air Compressor - 24L

The SGS 24L Air Compressor comes with a 2-Year Warranty from the date of purchase.

It is recommended to drain the tank after each use, or at least once a day, to remove accumulated moisture and prevent internal corrosion.

Yes, for typical spray painting tasks it can be used continuously. However, for very prolonged, high-volume spraying, monitor the compressor's duty cycle and consider a larger model if it cycles frequently.

Due to its oil-free design, no oil changes are needed. Periodic cleaning of the air filter and regular draining of the tank are the primary maintenance tasks.

The SGS 24L Air Compressor operates at a noise level of 78 dB, making it relatively quiet for its class.

While it might power an impact wrench for very short bursts, it is not recommended for continuous use with high-demand tools like impact wrenches. A larger capacity compressor is advised for such applications.

Yes, it comes with a standard 13A UK plug attached to the power cord.

Ensure the power cord is securely plugged into a working outlet. Check the main power switch is in the 'ON' position. Verify that the tank pressure is not already at its maximum cut-off point.

This may indicate an issue with the safety valve itself or that the tank pressure has exceeded its safe limit. If the pressure is normal, the valve may need replacement. If pressure is too high, check the pressure switch.

Check that the pressure regulator is set correctly. Inspect air hoses and connections for leaks. Ensure the air filter is clean and not blocked. If the problem persists, the motor or pump may require servicing.

This can happen if the air demand exceeds the compressor's capacity, especially with tools like impact wrenches. Ensure no air leaks in the system. For continuous use, a larger compressor may be necessary.