Liberon Laminate Floor Reviver restores the shine on worn interior laminate and vinyl flooring whi...Liberon Laminate Floor Reviver restores the shine on worn interior laminate and vinyl flooring whilst protecting against everyday wear and tear. It helps to fill and hide superficial scratches and scuff marks, and provides a non-slip protective finish in a one-step application that dries in 30 minutes. Coverage: 40-50m² per litre. Location: Interior. Dry Time: 30 minutes. Application: Cloth or Mop. Preparation: Ensure the floor is clean, dry and dust free. If required, clean the surface with Libéron Laminate Clean and Seal. Application: Apply a thin coat of the Laminate Reviver evenly to the floor using a sponge, mop or floor cloth and allow to dry for a minimum of 30 minutes. On heavy traffic areas or badly worn surfaces, apply a second coat once the first coat has dried thoroughly. For a higher shine, apply further coats of Laminate Reviver as above. Maintenance: to ensure the longevity of your laminate, clean it regularly with Laminate Clean and Seal and refresh with Laminate Reviver when the surface looks tired.
This guide helps you understand and effectively use Liberon Laminate Reviver. It's designed for anyone looking to restore the shine and protect their laminate and vinyl flooring. The Reviver offers a one-step application that helps to fill minor scratches and provides a non-slip finish. A key point to remember is to ensure your floor is clean and dry before application for optimal results.
All features
Model Part Number
126774
Brand
Liberon
Extended Product Information
FAQs
How much area does one liter of Liberon Laminate Reviver cover?
One liter covers approximately 40-50 square meters.
How long does it take for the Reviver to dry?
The Reviver dries in approximately 30 minutes.
Can I use this product on hardwood floors?
No, this product is specifically designed for laminate and vinyl flooring only.
How often should I apply Liberon Laminate Reviver?
Reapply when the surface looks tired or as needed, depending on the amount of wear and tear.
Can I apply multiple coats to achieve a higher shine?
Yes, for a higher shine, you can apply further coats of Laminate Reviver after the previous coat has dried.
What should I use to clean the floor after applying the Reviver?
Clean regularly with Liberon Laminate Clean and Seal to maintain the floor's appearance.
Is the Reviver non-slip?
Yes, it provides a non-slip protective finish.
Troubleshooting
Reviver is not adhering properly.
Ensure the floor is completely clean, dry, and free of any cleaning product residue before application. If necessary, re-clean the floor.
Uneven application or streaks appear.
Apply the Reviver in a thin, even coat using a sponge, mop, or floor cloth. Avoid applying too much product in one area.
Floor remains sticky after drying.
Ensure the product has dried completely, usually a minimum of 30 minutes. If stickiness persists, apply a thin second coat.
Pros and Cons
Pros
One-step application saves time and effort.
Provides a protective layer against wear and tear.
Helps to conceal minor scratches and scuffs.
Offers a non-slip surface, enhancing safety.
Restores the original shine of the flooring.
Cons
Requires proper floor preparation for best results.
May require multiple coats for heavily worn areas.
Effectiveness depends on the severity of existing damage.
Not suitable for all types of flooring; intended for laminate and vinyl.
Setup, Compatibility & Care
Setup
Preparation: Ensure the floor is thoroughly cleaned, dry, and free of dust. Use a suitable cleaner if necessary, such as Libéron Laminate Clean and Seal.
Application: Apply a thin, even coat of Liberon Laminate Reviver to the floor using a sponge, mop, or floor cloth.
Drying: Allow the applied coat to dry for at least 30 minutes before walking on the floor.
Second Coat (If Needed): For heavily worn areas, apply a second coat after the first has completely dried.
Achieving Higher Shine: Apply further coats of Laminate Reviver for a higher shine.
Compatibility
Suitable for laminate and vinyl flooring.
Always test in an inconspicuous area first to ensure compatibility.
Care
Clean regularly with Laminate Clean and Seal to maintain the floor's appearance and protect the Reviver.
Reapply Liberon Laminate Reviver as needed to refresh the surface and maintain its protective properties.