Best current price£24.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£24.75Visit shop - Plug & Play Microwave Sensor For T380. Detection Radius 20%/50%/75%/100% (1-8 Meters)
Visit shop7 offers from £24.75 - £32.00
View price history by clicking the chart icon.
This ENER-J Plug and Play Microwave Sensor (T381) is designed for users of the T380 UFO LED Highbay who want to automate their lighting for energy savings. Its key benefit is intelligent dimming and auto-off functionality based on occupancy and ambient light, significantly reducing electricity costs. A potential caveat is that full customization requires the optional T382 remote.
| Model Part Number | T380 |
|---|---|
| Brand | ENER-J |
No, the T382 remote control is sold separately and is required for accessing and adjusting the sensor's advanced settings.
The sensor is designed for a maximum mounting height of 40 feet (12 meters).
No, this sensor is specifically designed for the ENER-J T380 UFO LED Highbay and is not compatible with other models or brands.
It uses 5.8GHz microwave technology to detect movement by sensing Doppler shifts in reflected waves. This allows it to detect movement even through thin materials like plastic or glass.
The 'Hold Time' is the duration the light will remain at full brightness after the last detected movement before it begins to dim or turn off, based on other settings.
An IP65 rating means the sensor is dust-tight and protected against water jets, making it suitable for various industrial and commercial environments.
The daylight sensor measures ambient light levels. If the natural light in the area meets or exceeds the preset LUX threshold, the sensor will prevent the lights from turning on or will dim/turn them off, conserving energy.
Check that the power supply to the highbay is active. Verify the sensor is correctly seated and locked in place. Ensure the detection radius and sensitivity settings (if adjusted via remote) are appropriate for the area. Test with the remote to confirm basic functionality.
Confirm there is no continuous movement within the sensor's detection range. Check the 'Hold Time' setting; it might be set too long. Ensure the 'Light Control' setting is not set to '24H' if you expect it to turn off at certain times. Verify the sensor is not obstructed.
Adjust the 'Hold Time' setting to a longer duration using the T382 remote. Ensure the 'Detection Radius' is set appropriately for the coverage area needed.
Verify the 'Light Control' setting is not '24H'. Adjust the LUX setting (10/30/50 LUX) using the T382 remote to the desired ambient light threshold for dimming or switching off.
Setup:
Compatibility:
Care:
