Paslode Nails - 75 x 3.1mm

These nails are primarily intended for heavy-duty construction tasks such as framing, structural assembly, and general building applications where strong holding power is required.

Yes, the hot-dipped galvanization provides excellent resistance to rust and corrosion, making them suitable for outdoor applications and exposure to the elements.

No, these specific nails (75mm x 3.1mm) are optimized for and primarily designed for use with the Paslode IM350 and IM350+ series nail guns. Always check your tool's specifications.

Each Paslode Handy Pack contains 1100 nails.

Ring shank refers to the rings or annular grooves around the nail shaft. These grooves significantly increase withdrawal resistance, making the nail hold more firmly in the material.

Yes, the Handy Pack includes 1100 nails and one fuel cell, providing you with the essential consumables to begin operation with a compatible Paslode IM350 nail gun.

Ensure your Paslode IM350 nail gun is clean, well-maintained, and using a fresh fuel cell. Drive the nails straight and to the appropriate depth for the material being fastened.

Check the fuel cell level; replace if low or empty. Ensure the nail gun is properly seated against the work surface. Clean the tool's drive blade and magazine.

Verify you are using the correct nail size (75 x 3.1mm) for your IM350 model. Ensure nails are loaded correctly and not damaged. Check for obstructions in the nail gun magazine.

Ensure the fuel cell is correctly installed and has sufficient fuel. Check battery power if applicable to your IM350 model. Clean the tool's internal components as per the manual.

Confirm the nails are ring shank and are being driven to the correct depth. Avoid over-driving, which can reduce holding power. Ensure wood is dry and suitable for nailing.