Rustins Water-Based Wood Dye - Light Oak - 250Ml
Best current price£9.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£9.00Visit shop B&Q - Water-Based Wood Dye Medium Oak 250Ml
Visit shopB&Q£9.00Visit shop All Offers
6 offers from £9.00
View price history by clicking the chart icon.
B&Q - Water-Based Wood Dye Light Oak 250MlFree delivery in 1–3 days£9.00Visit shop →
OnBuy.comRustins Water-Based Wood Dye Medium Oak 250Ml 5015332005833
Free delivery in 1–3 days
£9.00
Visit shop
Rustins Water-Based Wood Dye Medium Oak 250MlFree delivery in 1–3 days£9.00Visit shop →
Rustins Water-Based Wood Dye Light Oak 250Ml 5015332005819Free delivery in 1–3 days£9.00Visit shop →
Rustins Water-Based Wood Dye Light Oak 250MlFree delivery in 1–3 days£9.00Visit shop →
Product Information
Full details
This Rustins Water-Based Wood Dye in Light Oak is designed for DIY enthusiasts and professionals seeking to enhance the natural beauty of wooden floors and furniture. Its key benefit is a deep, long-lasting colour penetration with a quick-drying, low-odour formula. A potential caveat is the need for proper surface preparation to ensure optimal results.
All features
| Colour | Brown |
|---|---|
| Model Part Number | WDLOW250 |
| Brand | RUSTINS |
Extended Product Information
FAQs
Can I use this dye on an already finished wooden surface?
No, this dye is designed for bare wood. It needs to penetrate the wood fibres to be effective. Existing finishes must be removed first.
How long does it take for the dye to dry?
The dye is quick-drying, typically dry to the touch within 30-60 minutes. Allow longer for recoating, especially in humid conditions.
What kind of topcoat should I use over the dye?
Once completely dry, you can apply most water-based or solvent-based topcoats, such as varnish, lacquer, or wax, to protect the dyed surface.
Is this dye suitable for exterior wood?
This product is primarily for interior use. For exterior applications, it would need to be protected with a suitable exterior-grade topcoat.
How do I clean my brushes after use?
Clean your brushes and equipment immediately after use with warm, soapy water.
Can I mix different Rustins wood dye colours?
Yes, Rustins wood dyes can be intermixed to create custom colours. Always test your custom mix on a scrap piece of wood first.
What is the coverage rate of this dye?
Coverage varies depending on the wood porosity and application method, but typically one 250ml tin covers approximately 2-3 square meters per coat.
Troubleshooting
Uneven colour application
Ensure the wood is properly sanded and free of dust and contaminants. Apply the dye evenly and work with the grain. For very porous woods, consider a pre-conditioner.
Dye not penetrating the wood
Verify that the surface is bare wood and has been adequately sanded. Re-sanding with a finer grit can sometimes improve penetration.
Colour is too light
Apply a second coat of dye once the first coat is fully dry. For a significantly deeper colour, multiple coats may be necessary.
Brush marks are visible
Apply the dye thinly and evenly, working with the wood grain. Ensure you are not overloading the brush. If using a cloth, ensure even wiping.
Pros and Cons
Pros
- Penetrates deep for long-lasting colour.
- Quick drying time speeds up projects.
- Low odour and minimal VOCs for safer indoor use.
- Enhances natural wood beauty effectively.
- Provides a warm, light oak finish.
Cons
- Requires thorough surface preparation for best results.
- May require multiple coats for desired depth of colour.
- Water-based formula means brushes must be cleaned immediately.
- Not suitable for exterior use without further protection.
Setup, Compatibility & Care
Preparation: Ensure wooden surfaces are clean, dry, and free from dust, grease, and old finishes. Sand the wood smooth, starting with a coarser grit and finishing with a finer grit sandpaper. Wipe away all dust.
Application: Stir the dye thoroughly before use. Apply evenly with a brush, cloth, or sponge. For a more intense colour, apply a second coat once the first is dry to the touch (typically 30-60 minutes). Always test on an inconspicuous area first to check the final colour.
Compatibility: This dye is specifically formulated for bare wood. It is compatible with most water-based and solvent-based topcoats (varnish, lacquer, wax, oil) once the dye is completely dry. Do not use on painted or sealed surfaces.
Care: Clean brushes, rollers, and equipment immediately after use with warm soapy water. Store the dye in a cool, dry place away from direct sunlight and frost.