Provides a permanent, flexible, and watertight seal prior to tiling on surfaces such as plasterboa...Provides a permanent, flexible, and watertight seal prior to tiling on surfaces such as plasterboard, concrete, plywood, and more. Formulated with industry best practices in mind, this product provides quality and peace of mind. Creates a watertight barrier on walls and floors covering up to 7.5m² depending on the substrate. Can be applied to plasterboard, MDF, plywood, cementitious board, brickwork, concrete and specialist wet room boards. Suitable for interior and exterior use – Ideal for showers, wet rooms and bathrooms, as well as balconies and partially covered exterior areas.
This guide is for anyone using the Everbuild Aquaseal Waterproof Tanking Membrane in Blue. The primary benefit is the creation of a permanent, flexible, and watertight seal before tiling. A key consideration is proper surface preparation to ensure optimal performance. This membrane is designed for use on various surfaces like plasterboard, concrete, and plywood, making it ideal for wet rooms, showers, and bathrooms, both indoors and outdoors.
All features
Colour
Blue
Brand
Everbuild
Extended Product Information
FAQs
What surfaces can I apply the membrane to?
The membrane can be applied to plasterboard, MDF, plywood, cementitious board, brickwork, concrete, and specialist wet room boards.
Is this product suitable for outdoor use?
Yes, it is suitable for both interior and exterior use, including balconies and partially covered exterior areas.
How much area does one container cover?
Coverage is up to 7.5m², but it depends on the substrate.
What is the drying time?
Drying times can vary depending on environmental conditions, so always refer to the product instructions.
Can I apply tiles directly to the membrane?
Yes, once the membrane is fully dry, you can proceed with tiling.
How should I clean the application tools?
Clean tools immediately after use with the appropriate solvent as recommended by the manufacturer.
What safety precautions should I take?
Always wear appropriate personal protective equipment (PPE), such as gloves and eye protection, during application. Ensure adequate ventilation.
Troubleshooting
Membrane is not adhering properly.
Ensure the surface is properly prepared, clean, and dry. Apply the membrane in the correct thickness and allow for proper drying time.
Bubbles or imperfections appear after application.
Ensure uniform application and avoid excessive air entrapment. In some cases, light sanding can smooth out imperfections.
Pros and Cons
Pros
Creates a reliable watertight barrier.
Suitable for various substrates, increasing its utility.
Can be used in both interior and exterior environments.
Flexible nature accommodates minor substrate movement.
Cons
Coverage area can vary depending on the substrate.
Requires proper surface preparation for optimal performance.
Not suitable for areas with constant water submersion.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose particles or contaminants. Repair any cracks or imperfections.
Application: Apply the membrane using a brush or roller, following the manufacturer's instructions for the recommended thickness and number of coats.
Drying Time: Allow the membrane to dry completely before proceeding with tiling or other finishes. Drying times can vary depending on environmental conditions.
Compatibility: Compatible with various substrates including plasterboard, MDF, and concrete.
Care: Avoid puncturing or damaging the membrane during installation. Regularly inspect the membrane for any signs of damage, especially in high-use areas.