Spring Lever Connectors - 3 Terminal - 32A - 10 Pack

Reusable lever operated connectors for solid, stranded and flexible conductors. These 32A spring l...

Best current price£6.30from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£6.30Visit shop

B&Q - 10 X 3 Reusable Lever Electrical Wire Cable Connectors Compact

Visit shop

One Offer

1 offer from £6.30

View price history by clicking the chart icon.

B&QB&Q - 10 X 3 Reusable Lever Electrical Wire Cable Connectors Compact

Free delivery in 1–3 days

£6.30

Visit shop

Product Information

Full details

These B&Q Spring Lever Connectors are designed for electricians and DIY enthusiasts needing a fast and reliable way to join solid, stranded, and flexible electrical cables. The primary benefit is the tool-free, screw-less connection achieved via spring levers, saving significant installation time, especially in confined spaces. A key caveat is ensuring proper conductor stripping and insertion to guarantee a secure connection.

All features

Model Part Number	Uep
Brand	B&Q

Extended Product Information

FAQs

Can I use these connectors for mains voltage?

Yes, these connectors are rated for 32A and are suitable for standard mains voltage applications, provided they are used according to electrical safety regulations and best practices.

What is the maximum wire size these connectors can accommodate?

They can terminate conductors up to 4mm².

Are these connectors reusable?

Yes, they are designed to be reusable, allowing for easy disconnection and reconnection.

Do I need any special tools to use them?

No, the spring lever mechanism allows for tool-free installation. You only need to strip the wire insulation.

What types of wire can I use with these connectors?

They are compatible with solid, stranded, and flexible conductors.

How many connectors are included in a pack?

Each pack contains 10 spring lever connectors.

How do I ensure a secure connection?

Ensure the conductor is stripped to the correct length (around 8-10mm), fully inserted into the port, and that the lever is firmly pushed down to lock the wire in place.

Troubleshooting

Connector not holding wire securely

Ensure the conductor is stripped to the correct length (approx. 8-10mm) and is fully inserted into the port before closing the lever. Check that the wire gauge does not exceed 4mm².

Lever is difficult to close

Verify that the conductor is inserted straight and fully. If using multiple wires in one port (ensure this is permitted by local regulations and the connector's design for specific configurations), ensure they are inserted evenly. Ensure no insulation is caught under the lever.

Wire pulls out easily

Re-check conductor insertion depth and ensure the lever is fully closed. The conductor should be firmly gripped. If the wire is damaged or corroded, use a fresh, clean strip.

Pros and Cons

Pros

Significantly speeds up electrical connections compared to traditional methods.
Eliminates the risk of loose screw connections.
Easy to use, even for those with limited electrical experience.
Compact size is advantageous for installations in limited space.
Reusable nature adds to cost-effectiveness.
Suitable for a wide range of wire types and sizes up to 4mm².

Cons

Requires proper conductor stripping to the correct length for a secure fit.
May not be suitable for extremely high-vibration environments where screw terminals offer greater mechanical security.
Each connection uses a separate connector; not a multi-gang unit.
The lever mechanism requires sufficient space to operate, though the connector itself is compact.

Setup, Compatibility & Care

Setup:

Ensure the power supply to the circuit is completely disconnected.
Identify the conductor wires to be joined (solid, stranded, or flexible).
Strip approximately 8-10mm of insulation from the end of each conductor. Ensure the stripped end is clean and free of damage.
Lift the spring lever on the connector to the fully open position.
Insert the stripped conductor firmly into the appropriate port until it is fully seated.
Push the lever back down to secure the conductor. You should feel a slight resistance as it locks.
Repeat for each conductor and each terminal.

Compatibility:

Wire Type: Solid, stranded, and flexible conductors.
Wire Size: Up to 4mm².
Current Rating: Maximum 32A.

Care:

These connectors are maintenance-free. Ensure they are kept clean and dry. Avoid exposing them to excessive moisture or corrosive substances. Periodically check connections after installation, especially in environments subject to vibration, to ensure they remain secure.