Cuprinol Softwood & Hardwood Furniture Wood Stain - Mahogany

Coverage is approximately 15 m² per 750ml, but this can vary depending on the wood type and the application method.

Apply 2-3 coats for best results.

Allow 2-6 hours between coats under normal weather conditions.

No, this stain is designed specifically for outdoor use.

Avoid applying the product if rain is likely before it has dried. If it rains shortly after application, allow the surface to dry completely and reapply the stain.

Clean tools with water immediately after use.

Do not apply in temperatures below 5 degrees C.

Store in a cool, dry place and avoid extremes of temperature.

Ensure you are applying the stain evenly, following the wood grain. Apply multiple thin coats rather than one thick coat. Stir the stain thoroughly before use.

This can be caused by applying too much stain in one coat or applying in unsuitable weather conditions. Ensure the surface is completely dry between coats and avoid application in damp or very cold conditions. Ensure surface preparation is performed.

The final color will depend on the wood type and the number of coats applied. Always test on an inconspicuous area first.