Hiatt Butt Hinge - Silver

For most standard interior doors, two hinges are sufficient. For heavier or taller doors, three hinges may provide better support and stability.

Screws are typically not included with butt hinges, as the required length and type will vary depending on the door and frame material. You will need to provide your own appropriate wood screws.

These hinges are primarily designed for interior use. For exterior doors, it is recommended to use hinges specifically rated for outdoor use and made from materials more resistant to weather elements.

Use a soft, damp cloth to wipe away dust and smudges. Avoid harsh chemicals or abrasive materials that could scratch or dull the finish.

Standard interior doors often use 3-inch or 3.5-inch hinges. Measure the height of your door and consult hinge sizing guides if unsure. The 'butt' refers to how the hinge leafs sit flush on the door and frame surfaces.

Yes, standard butt hinges like these are typically reversible and can be installed on either the left or right side of a door opening.

Ensure all hinge screws are tightened securely into the door and frame. Check if the door or frame has warped, or if the hinges are seated correctly in their mortises. Consider adding a third hinge for heavier doors.

Apply a small amount of light lubricating oil (e.g., WD-40 or silicone spray) to the hinge pin and work the door back and forth to distribute the lubricant.

If mounting into soft wood, use longer or thicker screws. For stripped holes, you can fill the hole with wood glue and toothpicks, let it dry, then re-drill and insert the screw. Alternatively, use screw anchors suitable for wood.