Stereo Audio Cable - 15m - Gold

This cable is designed specifically for analog stereo audio signals. It carries the left and right channel audio separately.

No, this cable is only for analog stereo audio. It cannot transmit video signals.

RCA refers to the common type of connector used for audio and video signals, characterized by a central pin and an outer ring. This cable uses two sets of RCA connectors, often called phono plugs.

Gold plating provides excellent conductivity and resistance to corrosion, ensuring a more reliable and higher-quality signal connection over time compared to standard metal plating.

Yes, provided your turntable has RCA audio outputs and you are connecting it to a device with RCA inputs, and that you are using a turntable with a built-in pre-amplifier or connecting to an amplifier with a phono input.

For neatness, use Velcro cable ties or zip ties to bundle the cable when not fully extended. Route it along walls or behind furniture to keep it tidy and prevent tripping hazards.

Please refer to the retailer's or kenable's official product page for specific warranty information, as it may vary by seller.

Ensure both red and black RCA plugs are securely connected to the correct input and output ports on both devices. Verify that the correct audio input is selected on the receiving device. Test the cable with different source and destination devices to rule out a fault with the cable itself.

Check that all RCA plugs are fully inserted and making good contact. Ensure the cable is not routed near power cables or sources of electromagnetic interference. Try a different audio cable to see if the issue persists.

Confirm that the red and black plugs are correctly matched to the right and left audio channels respectively on both the source and destination devices. Inspect the gold-plated connectors for any visible damage or debris.