Auxiliary Audio Cable - August TAA225B

The total cable length is approximately 130cm when taut, with a comfortable usable length of around 120cm.

No, the August TAA225B is an analog audio cable and only supports analog audio signals. It cannot transmit digital audio.

If your iPhone or iPad has a 3.5mm headphone jack (older models), it will work. Newer iPhones/iPads without a 3.5mm jack will require a separate adapter from Apple.

No, this cable uses standard 3.5mm AUX connectors. It will not work with a USB port unless your car stereo has a 3.5mm AUX input port.

Yes, the cable supports stereo channel audio for playback.

You can connect a wide range of devices including smartphones, tablets, laptops, speakers, car stereos, headphones, headsets, and CD players, provided they have a 3.5mm audio jack.

No, this is a passive analog audio cable. It does not have any active electronic components like a DAC.

Verify that both ends of the cable are securely plugged into the correct ports. Ensure the source device is playing audio and the destination device is set to AUX input. Test with different devices or a different cable to rule out a faulty connection.

Confirm that the headset or device connected has a TRRS (Tip-Ring-Ring-Sleeve) 3.5mm connector that supports microphone input. Check the audio settings on your source device to ensure the microphone input is enabled and selected.

Check the cable for any visible damage, such as kinks or fraying. Ensure connectors are clean. Try a different port on either device, as one port may be damaged.

Ensure the connected headset or device is designed to work with standard 3.5mm controls and that your source device supports these control signals via an AUX connection. Compatibility can vary between device manufacturers.