Best current price£105.60from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£105.60Visit shop (Latch Post 100Mm Sq X 2400Mm Long) Harrogate Aluminium Grey Gate Post 100Mm X 2400Mm 5016635000976
Visit shop
B&Q£135.60Visit shop B&Q - Harrogate Aluminium Gate Latch Post 2400mm High X 100mmx100mm Grey
Visit shop2 offers from £105.60 - £135.60
View price history by clicking the chart icon.
This guide is for homeowners and landscapers looking for a durable and versatile gate post solution. The Harrogate Aluminium Gate Latch Post offers a lightweight yet robust option for supporting gates, easily integrating with existing structures or standing alone. A potential consideration is that latch posts are blank, requiring manual drilling for latch hardware.
| Brand | Burbage Iron Craft |
|---|
Aluminium posts are significantly lighter than steel or timber, making them easier to handle and install, while also being highly resistant to rust and corrosion.
This post is designed to be versatile, but its 100mm square profile and pre-drilled (or blank in this case) options are best suited for gates with compatible hinge and latch mechanisms. Always check specifications.
No, the post comes with a grey finish that is durable and weather-resistant. Painting is optional and primarily for aesthetic preference.
As a latch post, it is blank. You will need to measure and drill holes appropriate for your chosen gate latch mechanism.
The wall thickness is 3.5mm, providing a good balance of strength and manageable weight.
A common recommendation is to set at least one-third of the post's total length into the ground, secured with concrete, for optimal stability. Consult local building practices for specific recommendations.
Ensure the post is set securely in concrete or properly anchored. If concrete has set, further anchoring may be required, or the post may need to be reset.
Use appropriate metal drill bits. Start with a smaller pilot hole and gradually increase the bit size. Ensure the post is firmly secured while drilling.
Verify the post is perfectly plumb and that any hinge posts are also correctly aligned. Minor adjustments may be possible by shimming or adjusting gate hardware.
Minor scratches can sometimes be buffed out with a soft cloth. For deeper scratches, a compatible grey paint touch-up may be considered, though the aluminium's natural finish is durable.
Setup: The Harrogate Aluminium Gate Latch Post is designed for direct installation. It can be securely fixed into the ground using concrete for maximum stability, or attached to existing solid structures. As a latch post, it comes blank, meaning you will need to drill holes to accommodate your specific gate latch hardware. Ensure the post is plumb and level before the setting material cures. For hinge posts (sold separately), alignment with the gate is crucial.
Compatibility: This 100mm square post is compatible with gates designed to work with this dimension. It is intended to match Burbage Iron Craft gates but can be adapted for other compatible gate systems. Always check the gate's hinge and latch requirements against the post dimensions.
Care: Minimal care is required. Clean the post periodically with a damp cloth and mild soap if necessary to remove dirt or debris. Avoid abrasive cleaners or solvents that could damage the finish. The inherent corrosion resistance of aluminium means it will maintain its appearance with little intervention.
