Rapid Rivet Nuts - Multicolor
Best current price£18.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£18.00Visit shop Rapid Steel Rivet Nuts B - Multi Colour
Visit shopThe Range£18.00Visit shop All Offers
3 offers from £18.00 - £21.39
View price history by clicking the chart icon.
Rapid Steel Rivet Nuts 5063806089520Free delivery in 1–3 days£21.39Visit shop →
Product Information
Full details
Rapid Rivet Nuts are the ideal solution for tradespeople and DIY enthusiasts working with thin-gauge materials where access to the rear side is restricted or impossible. These fasteners act as both a rivet and a captive nut, significantly increasing workflow efficiency by allowing for single-sided installation. While they are highly effective for materials with a grip range under 3mm, they are specifically engineered for thin-material applications and may not be suitable for heavy-duty structural projects requiring thicker engagement.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | 1515938 |
| Brand | Rapid |
Extended Product Information
FAQs
Can I use these for wood projects?
These are primarily designed for thin metal or plastic materials; they do not provide sufficient grip in soft or fibrous materials like wood.
What tools do I need?
You will need a standard rivet nut installation tool and a drill bit that matches the required hole size for your specific nut size.
What does 'grip range' mean?
Grip range refers to the thickness of the material you are fastening; for these, it means your metal or panel must be less than 3mm thick.
Can I remove a set rivet nut?
They are designed as permanent fasteners. Removal usually requires drilling out the head, which may damage the surrounding material.
Are these weather-resistant?
They are suitable for most indoor and light outdoor applications, but consider environmental factors if using in highly corrosive or marine environments.
Troubleshooting
The rivet nut spins in the hole after installation.
The hole was likely drilled too large. Ensure you use the exact drill bit size recommended for the specific fastener diameter.
The threads are difficult to engage with a bolt.
Check that the rivet nut was fully compressed; if not properly set, the internal thread can distort. Also, ensure the bolt thread pitch matches the rivet nut.
The rivet nut cracked or failed to mushroom correctly.
Verify that your material thickness is within the sub-3mm range and that the rivet tool is set to the correct pulling force.
Pros and Cons
Pros
- Eliminates the need for rear-side access
- Acts as both a rivet and a threaded insert
- Perfect for thin-gauge sheet metal applications
- Increases overall assembly speed
- Provides a reliable captive thread
Cons
- Limited to materials with a grip range under 3mm
- Not suitable for high-load structural steel applications
- Requires specific riveting tools for proper deformation
- Cannot be reused once set
Setup, Compatibility & Care
To install a Rapid Rivet Nut, you must first drill a hole of the appropriate diameter for the specific fastener size you are using. Insert the nut into the hole and use a professional rivet nut tool to compress the shank. As the tool pulls the shank, it mushrooms on the rear side of the material, locking it firmly in place.
Ensure that your material thickness is within the sub-3mm specification to prevent the fastener from failing to seat properly or spinning in the hole. After installation, the internal threads should be kept clean of debris to ensure a smooth engagement with your bolts. Store any unused rivets in a dry, low-humidity environment to prevent oxidation.