RS3 Electric Scooter - 350W

Locate the folding lever near the handlebar stem. Release the lever, fold the stem down, and secure it with the folding latch.

The RS3 has a maximum range of 15.5 miles under ideal conditions.

The battery takes approximately three hours to fully charge from empty.

The RS3 has a maximum speed of 15.5 mph.

The RS3 is weather-resistant. However, avoid riding in heavy rain or puddles to protect electrical components.

The battery pack is removable; unscrew the battery compartment, remove the old battery, insert the new one, and re-secure the compartment.

Replacement parts can be found through Riley Scooters or authorized retailers.

Refer to the product documentation or contact customer support for warranty information.

Check if the battery is charged and properly connected. Ensure the power button is pressed firmly and held for a few seconds.

Check the drive mode setting and ensure it's not set to Eco mode. Ensure the throttle is functioning properly and that the battery has sufficient charge.

Inspect the brake pads for wear and tear. Adjust or replace them as needed. Check brake cable tension.

Make sure the charger is properly connected to the scooter and a working power outlet. Check the charger's LED indicator for charging status. If the issue persists, try a different outlet or contact support.

Ensure the locking mechanism is clean and free of debris. Apply a small amount of lubricant if necessary. Check for any obstructions preventing smooth operation.