Best current price£8.64from Amazon
Shopping.co.uk recommended and popular offers
Amazon£8.64Visit shop Yonico 13152 1/4-Inch Radius Cove Edge Forming Router Bit 1/2-Inch Shank
Visit shop5 offers from £8.64 - £17.31
View price history by clicking the chart icon.
This guide is for woodworkers seeking precise decorative edge profiles. The Yonico Cove Edge Forming Router Bit (1/4" Shank, 1/2" Radius) offers industrial-grade quality for creating smooth, consistent cove edges on various wood types, though users should ensure their router collet size matches the 1/4" shank. Key features include C3 micro-grain tungsten carbide cutters, solid hardened steel bodies with anti-kickback design, and a heat-resistant Teflon coating for durability and clean cuts.
| Model Part Number | 13156q |
|---|---|
| Brand | YONICO |
The Yonico Cove Edge Forming Router Bit is designed to create a decorative concave (cove) edge profile with a 1/2" radius on wood projects.
This specific model has a 1/4" shank, meaning it requires a router with a 1/4" collet.
Yes, this bit can be used on plywood and MDF, but ensure you use appropriate feed rates and depth of cuts to avoid chipping or tear-out, especially on the veneered surfaces.
The Teflon coating can be cleaned with a soft cloth and a mild wood-friendly solvent or cleaner. Avoid abrasive materials that could scratch the coating.
The anti-kickback design incorporates features like relief cuts that help to reduce the tendency of the bit to catch on the wood and suddenly jolt the router, enhancing user safety.
While built for industrial quality, continuous heavy-duty industrial use might require more frequent sharpening or maintenance compared to lighter-duty use. However, it is designed for durability.
This bit creates a cove edge with a 1/2" radius.
Ensure the bit is sharp and free of debris. Check that the router speed is appropriate for the wood type and that the feed rate is consistent. Verify the bit is securely tightened in the collet.
Reduce the feed rate or the depth of cut. Ensure the Teflon coating is intact and clean. Check for any obstructions in the cut path.
Make sure the bit is perfectly centered in the collet and that the collet is clean. Check for any damage to the bit itself. Ensure the router is functioning correctly.
Setup: Ensure your router has a 1/4" collet. Insert the router bit shank into the collet until it is fully seated, then tighten the collet securely. Always unplug the router before inserting or removing bits.
Compatibility: This bit is designed for use with standard routers equipped with a 1/4" collet. It is suitable for use on softwoods, hardwoods, and some composite materials. Avoid using this bit for aggressive metalworking or masonry.
Care: After each use, clean the bit to remove any wood dust or resin buildup. A soft brush or a cloth dampened with a wood-friendly solvent can be used. Store the bit in a dry place, preferably in its original packaging or a bit organizer, to prevent rust and damage. Periodically inspect the cutting edges for wear or damage.
