Setup, Compatibility & Care
Setup: Each knob is supplied with two M4 x 25mm fixing screws. If your door or drawer already has a single hole for a knob, you may be able to replace the existing hardware by unscrewing the old knob and attaching the new one using the provided screw through the existing hole. If no hole is present, you will need to drill a small hole suitable for the M4 screw. Insert the screw from the back of the door or drawer, align the knob, and tighten with a screwdriver.
Compatibility: These knobs are designed for standard cabinet doors and drawers with a single fixing point. Ensure the hole size is appropriate for the M4 screws provided. If replacing existing hardware, check that the hole centres match if using existing holes.
Care: To maintain the brushed nickel finish, clean the knobs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish. For tougher marks, a mild soap and water solution can be used, followed by drying with a clean cloth.