Best current price£13.30from eBay
Shopping.co.uk recommended and popular offers
eBay£13.30Visit shop Varilight HC3 Mirror Chrome 1 Gang 2W Push-On/Off Dimmer Switch 60-400W V-Dim
Visit shop
B&Q£14.00Visit shop B&Q - Single V-Dim Rotary 2-Way Dimmer 1 X 60-400W Chrome With Chrome KnobHc3
Visit shop10 offers from £13.30 - £24.74
View price history by clicking the chart icon.
The Varilight Classic HC3 Dimmer Switch is designed for homeowners and DIY enthusiasts looking to upgrade their lighting control with a durable, stylish silver mirror chrome finish. It provides smooth 400W dimming capabilities for one or two-way circuits, making it a reliable choice for standard residential installations; however, it requires a 25mm deep wall box, which necessitates verifying your existing electrical housing before purchase.
| Colour | Silver |
|---|---|
| Model Part Number | HC3 |
| Brand | Varilight |
This model is designed for standard resistive loads. For dedicated LED dimming, please consider specific Varilight LED-compatible models.
Yes, the HC3 is designed to function in both 1-way and 2-way lighting circuits.
You must use a wall box with a minimum depth of 25mm for proper installation.
The silver mirror chrome finish is durable, but it should be cleaned with a soft dry cloth to maintain its shine.
This switch is rated for a maximum load of 400W.
Ensure the total wattage of the bulbs connected is within the minimum and maximum load requirements of the dimmer.
Verify that your back box is at least 25mm deep and clear of debris or excess wiring preventing the switch from seating correctly.
Check all wire connections to the terminals for tightness and ensure the fuse or circuit breaker for that zone is active.
For successful installation, ensure the power supply is switched off at the mains. You must have a 25mm deep wall box; if your current box is shallower, the unit will not sit flush against the wall. The device is compatible with standard 1 or 2-way wiring configurations. To maintain the mirror chrome finish, avoid using abrasive chemical cleaners. Simply wipe the switch plate with a soft, dry microfiber cloth to remove dust and fingerprints, keeping the silver surface polished and clean.
