SolaDirect Simplex Rope Clip Clamp - 2 mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SolaDirect Simplex Rope Clip Clamp is an essential tool for DIY enthusiasts, hobbyists, and riggers who need a reliable way to secure 2 mm wire rope, jute, or polypropylene rope. Its primary benefit is the ability to create secure loops and cable terminations for turnbuckles or thimbles, ensuring a firm hold on loose rope ends. Please note that this clamp is designed specifically for a 2 mm diameter rope, and using it with significantly thicker or thinner cables may compromise the integrity of the connection.
All features
| Brand | SolaDirect |
|---|
Extended Product Information
FAQs
Can I use these clamps for lifting heavy loads?
No, these simplex clamps are designed for light-duty applications and should never be used for overhead lifting or critical load-bearing tasks.
Is this clamp suitable for 3 mm rope?
No, this clamp is specifically engineered for 2 mm rope. A 3 mm rope will be too thick to fit correctly into the clamp body.
Does this work with both steel and synthetic ropes?
Yes, this clamp is versatile enough to work with wire rope as well as jute and polypropylene fiber ropes.
How many clamps do I need for a single loop?
For light-duty work, one simplex clamp is often sufficient, but for added security, you may use two clamps spaced evenly along the overlapping section.
Can these be used in saltwater environments?
While the materials are corrosion-resistant, saltwater is highly abrasive; frequent inspection is required if used in maritime environments.
Troubleshooting
The clamp slips or slides on the rope.
Ensure the rope diameter is exactly 2 mm. If the rope is slightly smaller, the clamp will not maintain proper friction.
The screw is difficult to turn.
Clear any debris or grit from the screw threads and apply a small amount of machine lubricant if necessary.
The rope is fraying inside the clamp.
The screw may be overtightened; loosen slightly and ensure the wire rope ends are properly cut and sealed prior to clamping.
Pros and Cons
Pros
- Compact and lightweight design ideal for small-scale projects
- Easy to install using basic hand tools
- Compatible with a wide variety of rope materials
- Provides a clean, finished look for cable loops
Cons
- Not intended for overhead lifting or high-load safety applications
- Requires exact matching with 2 mm rope for optimal security
- Limited to single-screw pressure compared to heavier duplex clamps
Setup, Compatibility & Care
To set up your rope assembly, ensure the rope is clean and free of fraying before insertion. Always match the clamp size precisely to the 2 mm rope specification. When installing, tighten the screw firmly, but be careful not to overtighten, which could crush the rope fibers or deform the steel strands. For long-term care, periodically inspect the clamp screw to ensure it has not vibrated loose due to tension changes. If the clamp is used in humid or outdoor conditions, check for signs of rust periodically and replace the unit if the structural integrity appears compromised.