FLAT CAT6 Ethernet LAN Patch Cable - Kenable - Cat6 - 0.5m - White

This Cat6 cable supports data transfer rates of up to 1000Mbps (1 Gigabit per second).

Yes, Cat6 cables are backward compatible and will work with Cat5e and Cat5 devices, though speeds will be limited by the slower standard.

The flat design (1.4mm thick, 5mm wide) allows the cable to be easily routed under carpets, along baseboards, or through narrow gaps where a round cable would be difficult or impossible to fit, providing a cleaner and more discreet installation.

U/UTP stands for Unshielded Twisted Pair. It means the individual wire pairs inside the cable are twisted together but are not enclosed in an additional metal shield. This design is common for shorter runs and less interference-prone environments.

This cable is designed for indoor use. Outdoor cables typically require additional weatherproofing and UV resistance which this model does not have.

This particular model (kenable 007260) is 0.5 meters long.

The RJ45 connector contacts are plated with Copper.

Ensure both RJ45 connectors are fully seated and clicked into place on both devices. Verify that the connected devices (router, computer, etc.) are powered on and functioning. Try a different Ethernet port on your router or switch. Test with another known working cable to rule out a cable fault.

Check for physical damage to the cable, such as kinks or cuts. Ensure the cable is not routed too close to sources of strong electromagnetic interference. Confirm that both connected devices support gigabit speeds (1000Mbps). Clean the RJ45 connector contacts with a dry cloth.

While designed to be flat, the cable may have a slight curve from packaging. Gently unroll the cable and lay it flat, allowing it to relax. Avoid forcing the cable into tight bends that are sharper than its minimum bend radius.