Toupret Ready To Use Joint & Skim - White

No, the Toupret Ready To Use Joint & Skim is specifically designed for interior applications only.

No, this is a ready-to-use product. It does not require any mixing.

Drying time varies depending on application depth and environmental conditions (temperature, humidity). It is typically ready to sand when it has turned white and feels firm to the touch, usually within a few hours for thin layers.

Yes, the product has no depth limit, meaning you can fill deep holes. However, for very deep voids, it is often best to apply in multiple thin layers, allowing each to dry, to ensure optimal performance and minimize drying time.

It is suitable for new or renovated substrates including gypsum plaster, plasterboard, cement, concrete, cellular concrete, breeze blocks, bricks, and stone.

Yes, once fully dry, it can be overcoated with any conventional paints and wall coverings.

Keep the container tightly sealed in a cool, dry place to prevent the product from drying out. Avoid frost.

Stir the product thoroughly in the tub. If very dry, a tiny amount of water may be added and mixed in carefully, but avoid adding too much to maintain consistency.

Apply in multiple thin layers rather than one deep application. Allow each layer to dry before applying the next.

Ensure the substrate is clean, dry, and free from dust, grease, or loose paint. Prime porous surfaces if necessary before application.

Ensure the product is fully dry before attempting to sand. Use fine-grit sandpaper and sand with light pressure.