Wave Spas pH Reducer - 1 KG

The ideal pH range for hot tub water is between 7.2 and 7.6.

You should test your spa water at least twice a week, or before every soak, to ensure the chemicals remain balanced.

Yes, the formula is effective for both hot tubs and swimming pools.

Yes, always add the product with the circulation pump running to ensure it is properly distributed throughout the spa water.

When the water is correctly balanced, the water will be comfortable for your skin. However, you should avoid direct contact with the concentrated powder.

Rinse the affected area thoroughly with plenty of fresh water immediately.

Check the total alkalinity levels first; if alkalinity is very high, the pH will be resistant to change. You may need to treat alkalinity before pH.

Cloudiness can occur if the chemical is added too quickly or not dissolved properly. Ensure the jets are running and allow the filter to cycle for at least 2-4 hours.

If you have over-corrected, you will need a pH Increaser to bring the balance back up to the recommended 7.2 to 7.6 range.