CDA 60cm 4 Zone Induction Hob - Black

This induction hob works with cookware that has a magnetic base. This typically includes cast iron, magnetic stainless steel, and specific induction-ready pots and pans. You can test compatibility by holding a magnet to the base of your cookware; if it sticks, it should work.

After ensuring the hob is cool, wipe the glass surface with a damp cloth and a mild detergent. For tougher stains, use a specialized ceramic hob cleaner and a non-abrasive sponge. Avoid abrasive cleaners and scouring pads.

The Residual Heat Indicator is a safety feature that illuminates to show which cooking zones are still hot after use. It turns off automatically when the surface has cooled down to a safe temperature.

While the hob has specific zone sizes, it's best to match the pan base diameter to the zone size for optimal efficiency and performance. The pan detection system will also ensure heating only occurs when a suitable pan is detected.

Yes, this hob requires a 32A electrical connection. It is strongly recommended to have it installed by a qualified electrician to ensure it meets safety standards.

The Child Lock function prevents the hob from being accidentally turned on or having its settings changed. It's activated and deactivated through a specific button sequence, providing safety in homes with young children.

The digital timer can be set for a duration of up to 99 minutes for each cooking zone.

Check that the power supply is connected and the circuit breaker is on. Ensure the child lock is not engaged. Verify the hob is properly installed and connected to a 32A supply.

Ensure the pan has a flat, magnetic base. Check that the pan is centered on the cooking zone. Make sure the base of the pan and the hob surface are clean and dry.

Wipe the control panel with a clean, damp cloth to remove any spills or residue. Ensure your hands are dry when operating the controls. If the issue persists, try turning off the power at the mains for a minute, then switching it back on.

This is normal if the zone is still warm. If the indicator remains on long after the zone has cooled, there might be an electrical issue; consult a qualified technician.