Amaran Base Stand - Silver

The product information does not specify a maximum weight capacity. However, its weighted steel base and aluminum construction are designed for typical desktop lighting and accessories. For very heavy items, it's recommended to test stability or use additional support.

While it has a 1/4-20in mount, the stand's height and stability are optimized for smaller accessories like LED panels or action cameras. It is not recommended for heavy DSLR or mirrorless cameras for primary support, especially when stability is critical.

Wipe the steel base with a soft, slightly damp cloth. Ensure it is dry afterward. The padding can also be cleaned with a damp cloth; avoid harsh chemicals.

The stand offers a height range from 55cm (1.79ft) to 87cm (2.83ft).

The stand is largely assembled out of the box. Setup involves extending the telescoping column and adjusting the tilt angle. The cable management clip may need to be attached.

Yes, the locking knob is designed to provide precise control and secure the chosen tilt angle for your setup.

You can mount any accessory with a 1/4-20in threaded mount, such as small LED lights, microphones, webcams, or small cameras.

Ensure the weighted steel base is on a completely flat surface. Check that the telescoping column lock and tilt angle locking knob are fully tightened. Verify the attached accessory is not excessively heavy for the stand's capacity.

Loosen the column lock completely before attempting to extend or retract the telescoping column. If still stiff, gently check for any obstructions within the column.

Ensure the accessory is properly threaded onto the screw. If the accessory itself has play, consider using a small washer if compatible and necessary for a tighter fit.

Ensure the clip is properly seated on the stand's pole. Some poles may have slight variations in diameter; try repositioning the clip to a more secure section of the pole.