Draper Induction Heater Coolant - 5 Litre

No, this coolant is specifically formulated for industrial induction heaters and is not designed for automotive cooling systems.

It is not recommended to mix this coolant with other types of coolants, as it may affect its performance and protective properties. Always use as a standalone product.

Check the coolant level regularly, especially before prolonged or intensive use of the induction heater. Top up as needed.

The lifespan depends on usage and operating conditions. It is recommended to replace the coolant if it shows signs of degradation, such as discoloration or cloudiness, or at intervals specified in your induction heater's manual.

This product is designed for workshop environments and its primary function is heat dissipation. While it may offer some resistance to freezing, it is not explicitly marketed as an antifreeze for extreme cold conditions. Store in a temperature-controlled environment.

Dispose of used coolant responsibly according to local environmental regulations. Do not discharge into waterways or the general environment.

Check the coolant level and top up if low. Ensure the radiators are clean and the fan is operational. Verify that the coolant is not contaminated or degraded; if so, replace it.

The coolant may be degraded or contaminated. Drain the system and refill with fresh Draper 5 Litre Induction Heater Coolant. Clean the cooling system before refilling.

Wipe up any spilt coolant immediately with an absorbent cloth. Avoid allowing the coolant to come into contact with sensitive electronic components or surfaces that could be affected by moisture.