Best current price£21.00from eBay
Shopping.co.uk recommended and popular offers
eBay£21.00Visit shop Eaton Moeller Switch Disconnector - P1-25/EA/SVB Switch-Disconnector
Visit shop50 offers from £21.00 - £116.96
View price history by clicking the chart icon.
10 offers from £19.62 - £72.73
View price history by clicking the chart icon.
This Eaton Control Switch from the T0 series is designed for professionals requiring robust and reliable control in industrial applications. Its key benefit is the maintained switching performance with a 45° switching angle, ensuring consistent operation. A potential consideration is its specific panel mounting requirement and Hand-0-Auto configuration, which may influence integration into existing setups.
| Series | T0 |
|---|---|
| Model Part Number | 019872 |
| Brand | Eaton |
Maintained switching means the switch will hold its selected position until it is manually moved to another position. This is different from momentary switches that return to their original position when released.
IP65 signifies that the device is protected against dust ingress and protected against low-pressure jets of water from any direction.
This switch is rated for AC voltage (690V AC) and current (20A). DC circuit compatibility depends on specific application requirements and should be verified against relevant DC standards and derating factors.
SPST stands for Single-Pole, Single-Throw. It means the switch controls a single circuit and has one 'on' and one 'off' state within that circuit.
The front plate typically has markings for 'Hand', '0' (Off/Neutral), and 'Auto', allowing the user to select the desired operating mode for connected equipment.
This switch uses screw terminals for secure electrical connections.
The switch has dimensions of 48mm length, 81mm width, and 48mm depth.
Verify power supply is active. Check terminal connections for tightness and correct wiring. Ensure the switching mechanism is not obstructed.
Inspect internal contacts for any signs of damage or contamination. Clean contacts gently if necessary following safety procedures. Ensure secure terminal connections.
Confirm the IP65 seal is properly seated and undamaged. Ensure the panel mounting is secure to maintain environmental protection.
Setup:
This switch is designed for flush panel mounting. Ensure the panel cutout dimensions are appropriate for the unit. Connect the load and source wires to the screw terminals, following standard electrical wiring practices and ensuring all power is disconnected before installation.
Compatibility:
Compatible with control circuits operating up to 690V AC and 20A. It adheres to IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, and UL standards, ensuring broad system integration potential in compliant environments.
Care:
Keep the front plate clean using a dry or slightly damp cloth. Avoid abrasive cleaners. Ensure the IP65 seal remains intact by checking for damage around the mounting interface. Regular visual inspection for wear and tear is recommended.
