Febi ABS Sensor Ring - 100505

The ABS sensor ring measures the wheel speed and sends this information to the ABS control unit. This helps to prevent wheel lockup during braking.

This Febi sensor ring is located on the rear axle of the Mercedes Benz E200 S210 and W210 models.

While the installation is straightforward, it requires some mechanical knowledge. If you are not comfortable with car repairs, consider professional installation.

A failing ABS sensor ring can cause the ABS warning light to illuminate, and the ABS system may not function correctly, leading to reduced braking performance.

You will likely need a jack, jack stands, wheel chocks, a socket set, and possibly a pry bar. Consult your vehicle's repair manual for a complete list of tools.

The sensor ring has an inner diameter of 92mm, an outer diameter of 96mm, and 48 teeth.

The ABS sensor ring typically lasts for many years. However, it should be replaced if it becomes damaged or worn, or if it causes ABS system malfunctions.

This product is sold with a 60-day return policy.

Check the ABS sensor ring for damage or debris. Ensure the sensor is correctly installed and the wiring is connected. If the light persists, a diagnostic scan may be needed.

Inspect the ABS sensor ring for damage. Make sure the sensor ring is properly seated and that there is no rust or other damage. If the issue continues, have the ABS system checked by a professional.

Ensure that you are using the correct tools and have the right model information. If problems persist, consult a repair manual or seek professional assistance.