Tikkurila Patio Paving Stain - Grey - EK03
Best current price£21.55from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£21.55Visit shop B&Q - Patio Paving StainFor Garden Concrete Stones & SlabsWater-Based1 Litre
Visit shopB&Q£21.55Visit shop One Offer
1 offer from £21.55
View price history by clicking the chart icon.
B&QB&Q - Patio Paving StainFor Garden Concrete Stones & SlabsWater-Based1 Litre
Free delivery in 1–3 days
£21.55
Visit shop
Product Information
Full details
Tikkurila Patio Paving Stain in Grey (EK03) is the ideal solution for homeowners looking to refresh faded or discoloured concrete slabs and paving stones. This water-based formula provides a durable, natural-looking finish that enhances the appearance of outdoor areas without obscuring the original texture of the stone. While it is highly effective at restoring tired concrete, it is important to note that this product is not suitable for brand-new paving or non-absorbent materials like polished natural stone.
All features
| Colour | Grey |
|---|---|
| Model Part Number | EK03 |
| Brand | Tikkurila |
Extended Product Information
FAQs
Can I use this on my natural granite patio?
No, this product is designed for porous concrete and stone. It will not adhere to non-absorbent materials like granite or polished natural stone.
How long should I wait before walking on the patio?
While the product is fast-drying, it is best to allow at least 24 hours of dry, fair weather before subjecting the surface to heavy foot traffic.
Do I need a primer?
No, this is a direct-to-surface stain. Just ensure the concrete is clean, dry, and absorbent.
Can I use this on brand-new paving stones?
It is not recommended. New paving stones often have a factory-applied sealer or high alkaline content; wait at least 6 months for the stone to weather naturally.
Is the finish matte or glossy?
It provides a natural, low-sheen finish that enhances the original appearance without a heavy, artificial glossy look.
What tools are best for application?
A medium-pile roller is great for flat areas, a masonry brush for edges, and a pump sprayer for large, uniform coverage.
Troubleshooting
Stain is not absorbing into the stone
The surface is likely not porous enough or was recently sealed. Ensure the stone is not sealed or polished before application.
Uneven colour appearance
This often happens if the surface was damp during application or if the stain was not mixed thoroughly. Ensure the surface is bone-dry and stir the product well before and during use.
Stain peeling off after a few weeks
This indicates the surface was likely dirty or contained residual moss/oils when applied. Thoroughly clean the surface with a degreaser and pressure wash before reapplying.
Pros and Cons
Pros
- Retains the natural texture of the paving
- Easy to clean up with water due to water-based formula
- Compatible with a wide range of application tools including sprays
- Effective at covering faded and discoloured concrete
Cons
- Not suitable for brand-new paving stones
- Will not adhere to non-absorbent surfaces like polished natural stone
- Not intended for use on wash concrete
Setup, Compatibility & Care
Before application, the surface must be clean and completely dry. Use a stiff broom or a pressure washer (ensuring the surface dries thoroughly afterwards) to remove all dirt, algae, and contaminants.
Compatibility Checklist:
- Suitable Surfaces: Industrially dyed concrete, uncoloured concrete, and porous paving stones.
- Unsuitable Surfaces: Brand-new paving (less than 6 months old), non-absorbent natural stone, polished granite, and wash concrete.
Care Instructions:
- Store in a cool, frost-free location.
- For maintenance, gently clean the treated area with water and mild detergent. Avoid harsh chemicals that may strip the stain prematurely.